A&D Blood Pressure Monitors Wide Range Cuff UA-767SW Upper Arm with AFib

Out of stock
Trusted by
50,000+ patients
Free Delivery on
Over £30
UK Registered
Pharmacy
Overview
The A&D UA-767SW is a well-specified upper arm blood pressure monitor that combines two features particularly valued by people who monitor their blood pressure regularly at home: a wide range cuff that accommodates a broader spread of arm sizes than standard cuffs, and an AFib screening function that checks for signs of an irregular heartbeat during every measurement. For anyone managing hypertension, following a medically supervised home monitoring programme, or simply wanting a more capable device that does more than return a basic number, the UA-767SW is a thoughtful, practical choice.
The wide range cuff is designed to fit a significant range of upper arm circumferences, removing the common frustration of a standard cuff that is slightly too tight or too loose and the inaccurate readings that come with it. Getting a correct fit matters enormously for reliable blood pressure measurement, and the wider accommodation of this cuff means it is suitable for a broader population without needing a separate accessory purchase. The automatic inflation system handles the measurement with a single button press, and the display presents systolic, diastolic, and pulse readings clearly alongside any relevant indicator symbols.
The AFib detection function screens for an irregular pulse pattern during each measurement, flagging a possible irregularity that warrants a follow-up conversation with a GP. Atrial fibrillation affects over a million people in the UK and is a significant risk factor for stroke, yet it frequently causes no noticeable symptoms. Having a monitor that passively screens for it during routine blood pressure checks adds a meaningful layer of awareness to your everyday heart health monitoring. View our full range of home health monitoring equipment for complementary products and advice.
How to Use the A&D UA-767SW Upper Arm Blood Pressure Monitor
- Confirm the cuff fits your arm correctly before first use. Wrap the wide range cuff around your bare upper arm and fasten it. It should be snug enough that you can slide two fingers underneath it comfortably, but not loose or overly tight. The cuff should sit two to three centimetres above the crook of your elbow with the tube running down the inner arm. NOT FOUND — please confirm the exact arm circumference range for the wide range cuff from product packaging and add to this step.
- Sit quietly for five minutes. Rest in a supported chair with your back straight, feet flat, and legs uncrossed. Avoid caffeine, smoking, food, and exercise for at least 30 minutes before measuring. These factors can all temporarily elevate blood pressure and distort your reading.
- Bare your upper arm. Remove any clothing from the arm. Rolled-up sleeves that are even slightly tight will restrict blood flow and affect the measurement.
- Apply the cuff to your non-dominant arm. Slide the cuff onto your bare upper arm, usually the left, with the lower edge two to three centimetres above the elbow crease. The air tube should run along the inside of your arm pointing towards your elbow.
- Rest your arm on a flat surface at heart height. Place your arm on a table or armrest so that the cuff sits level with your heart. Do not allow your arm to hang, as this increases hydrostatic pressure and elevates the reading.
- Press the start button. Press the start button once to initiate automatic inflation. The monitor will inflate the cuff and then gradually deflate it while recording your blood pressure and pulse.
- Stay still and silent throughout. Movement, talking, or crossing your legs during measurement will affect the result. Wait for the reading to appear on the display before relaxing.
- Read and record all results. Note your systolic and diastolic pressure, pulse rate, and whether the AFib or irregular heartbeat indicator is displayed. Log everything with the date and time — a pattern across multiple readings is what carries clinical meaning, not individual measurements in isolation.
- Wait two minutes before repeating. If you are taking more than one reading, allow two full minutes between measurements for the vessels to return to their baseline state.
Getting the most from AFib screening
- The AFib indicator appearing once does not mean you have atrial fibrillation — movement during measurement, for example, can trigger it.
- If the indicator appears consistently across multiple readings over several days, contact your GP for an ECG assessment.
- Continue monitoring your blood pressure as normal — the AFib screening happens automatically during every measurement without any additional steps.
Speak to a Pearl Chemist Group pharmacist if you have any questions about monitoring your blood pressure or about what an AFib indicator on your device might mean.
N/A
N/A
How to Store the A&D UA-767SW Blood Pressure Monitor
- Temperature: Store at normal room temperature, away from direct sunlight and extremes of heat or cold. Do not leave in a hot car or near a heat source.
- Moisture: This device is not waterproof. Keep away from water, steam, and damp surfaces. A dry shelf or drawer away from the immediate shower or bath area is preferable.
- Cuff storage: Store the wide range cuff loosely rolled or flat, without sharp kinks in the air tubing, which can cause cracking and affect inflation performance over time.
- Batteries: Remove batteries if the monitor will not be used for an extended period. Leaving depleted batteries in the device can cause corrosive damage to the battery compartment.
- Carry case or original box: Store the device in its carry case or original packaging when not in use to protect the casing, display, and cuff from dust and impact.
- Keep out of reach of children. The cuff tubing presents an entanglement hazard for young children.
Overview
The A&D UA-767SW is a well-specified upper arm blood pressure monitor that combines two features particularly valued by people who monitor their blood pressure regularly at home: a wide range cuff that accommodates a broader spread of arm sizes than standard cuffs, and an AFib screening function that checks for signs of an irregular heartbeat during every measurement. For anyone managing hypertension, following a medically supervised home monitoring programme, or simply wanting a more capable device that does more than return a basic number, the UA-767SW is a thoughtful, practical choice.
The wide range cuff is designed to fit a significant range of upper arm circumferences, removing the common frustration of a standard cuff that is slightly too tight or too loose and the inaccurate readings that come with it. Getting a correct fit matters enormously for reliable blood pressure measurement, and the wider accommodation of this cuff means it is suitable for a broader population without needing a separate accessory purchase. The automatic inflation system handles the measurement with a single button press, and the display presents systolic, diastolic, and pulse readings clearly alongside any relevant indicator symbols.
The AFib detection function screens for an irregular pulse pattern during each measurement, flagging a possible irregularity that warrants a follow-up conversation with a GP. Atrial fibrillation affects over a million people in the UK and is a significant risk factor for stroke, yet it frequently causes no noticeable symptoms. Having a monitor that passively screens for it during routine blood pressure checks adds a meaningful layer of awareness to your everyday heart health monitoring. View our full range of home health monitoring equipment for complementary products and advice.
How to Use the A&D UA-767SW Upper Arm Blood Pressure Monitor
- Confirm the cuff fits your arm correctly before first use. Wrap the wide range cuff around your bare upper arm and fasten it. It should be snug enough that you can slide two fingers underneath it comfortably, but not loose or overly tight. The cuff should sit two to three centimetres above the crook of your elbow with the tube running down the inner arm. NOT FOUND — please confirm the exact arm circumference range for the wide range cuff from product packaging and add to this step.
- Sit quietly for five minutes. Rest in a supported chair with your back straight, feet flat, and legs uncrossed. Avoid caffeine, smoking, food, and exercise for at least 30 minutes before measuring. These factors can all temporarily elevate blood pressure and distort your reading.
- Bare your upper arm. Remove any clothing from the arm. Rolled-up sleeves that are even slightly tight will restrict blood flow and affect the measurement.
- Apply the cuff to your non-dominant arm. Slide the cuff onto your bare upper arm, usually the left, with the lower edge two to three centimetres above the elbow crease. The air tube should run along the inside of your arm pointing towards your elbow.
- Rest your arm on a flat surface at heart height. Place your arm on a table or armrest so that the cuff sits level with your heart. Do not allow your arm to hang, as this increases hydrostatic pressure and elevates the reading.
- Press the start button. Press the start button once to initiate automatic inflation. The monitor will inflate the cuff and then gradually deflate it while recording your blood pressure and pulse.
- Stay still and silent throughout. Movement, talking, or crossing your legs during measurement will affect the result. Wait for the reading to appear on the display before relaxing.
- Read and record all results. Note your systolic and diastolic pressure, pulse rate, and whether the AFib or irregular heartbeat indicator is displayed. Log everything with the date and time — a pattern across multiple readings is what carries clinical meaning, not individual measurements in isolation.
- Wait two minutes before repeating. If you are taking more than one reading, allow two full minutes between measurements for the vessels to return to their baseline state.
Getting the most from AFib screening
- The AFib indicator appearing once does not mean you have atrial fibrillation — movement during measurement, for example, can trigger it.
- If the indicator appears consistently across multiple readings over several days, contact your GP for an ECG assessment.
- Continue monitoring your blood pressure as normal — the AFib screening happens automatically during every measurement without any additional steps.
Speak to a Pearl Chemist Group pharmacist if you have any questions about monitoring your blood pressure or about what an AFib indicator on your device might mean.
N/A
N/A
How to Store the A&D UA-767SW Blood Pressure Monitor
- Temperature: Store at normal room temperature, away from direct sunlight and extremes of heat or cold. Do not leave in a hot car or near a heat source.
- Moisture: This device is not waterproof. Keep away from water, steam, and damp surfaces. A dry shelf or drawer away from the immediate shower or bath area is preferable.
- Cuff storage: Store the wide range cuff loosely rolled or flat, without sharp kinks in the air tubing, which can cause cracking and affect inflation performance over time.
- Batteries: Remove batteries if the monitor will not be used for an extended period. Leaving depleted batteries in the device can cause corrosive damage to the battery compartment.
- Carry case or original box: Store the device in its carry case or original packaging when not in use to protect the casing, display, and cuff from dust and impact.
- Keep out of reach of children. The cuff tubing presents an entanglement hazard for young children.
FAQs
The UA-767SW combines two features not found on all models in A&D's range: a wide range cuff that accommodates a broader spread of arm sizes than a standard cuff, and an AFib screening function that automatically analyses your pulse for signs of an irregular rhythm during every blood pressure measurement. For anyone who has found standard cuffs too tight or who wants passive AFib awareness built into their regular monitoring routine, this model offers both in a single device.
The wide range cuff is designed to fit a broader range of upper arm circumferences than a standard cuff, making it suitable for a wider population without requiring a separate cuff purchase. For the exact arm circumference range, please refer to the product packaging or the instruction manual supplied with the monitor. NOT FOUND — please confirm the precise cuff range from A&D product documentation and update this answer. If you are unsure whether the cuff will fit your arm, our team can help you check in store.
During each blood pressure measurement, the UA-767SW analyses the waveform of your pulse. If it detects an irregular pattern consistent with atrial fibrillation, it displays an indicator symbol alongside your blood pressure reading. This happens automatically during every measurement — there is nothing extra you need to do. The function indicates a possible irregularity; it does not diagnose AFib. If the indicator appears regularly across multiple readings, contact your GP for an ECG assessment to investigate further.
A single occurrence of the AFib indicator is not necessarily cause for immediate concern — movement during measurement or other factors can trigger it. If it appears consistently across multiple readings over several days, this is worth acting on promptly by contacting your GP, who can arrange an ECG. Atrial fibrillation, when identified, can be managed effectively to significantly reduce the risk of stroke. Early detection and prompt follow-up are what matter most. If you are anxious about a result, our Pearl Chemist Group pharmacists are happy to talk it through with you.
Yes, provided the wide range cuff fits all users correctly. Blood pressure monitors that store multiple readings with individual user memory slots allow different household members to keep their data separate — check the instruction manual for the UA-767SW to confirm whether individual user profiles are supported and how to set them up. NOT FOUND — please confirm multi-user memory functionality from A&D specification and update this answer. Always ensure each person measures on the same arm and under consistent conditions for meaningful tracking.
Home blood pressure monitors are generally recommended for checking against a validated device approximately every one to two years, or sooner if readings seem inconsistent or unexpectedly different from surgery measurements. Bringing your monitor to a GP appointment for a comparison check is a straightforward way to do this. If the cuff shows wear or the monitor gives error messages, these may also be signs that the device needs attention. Keeping the device clean, stored correctly, and running on fresh batteries helps maintain accuracy between calibration checks.
A consistent difference where home readings are higher than surgery readings is less common than the reverse, but it is worth investigating. First, check cuff size — an ill-fitting cuff is the most frequent culprit. Confirm your technique, particularly arm positioning at heart height. If everything appears correct and the disparity persists, bring your monitor to your next GP appointment for a direct comparison. Your GP or a Pearl Chemist Group pharmacist can help identify whether the issue is technique, equipment, or a genuine difference in your blood pressure across different settings.
Yes. Our pharmacists can carry out a pulse check in store as part of our free health consultation service, and can advise you on what AFib is, why detection matters, and when to seek GP assessment. If your home monitor has been flagging an irregular heartbeat and you are unsure what to do next, speaking to one of our pharmacists is a reassuring first step. Visit your nearest Pearl Chemist Group branch or browse our range of home health monitoring devices online.