Alvita Sterile Dressing Spec 35 – 12 Pack
£0.00
Out of stock
Trusted by
50,000+ patients
Free Delivery on
Over £30
UK Registered
Pharmacy
Guaranteed safe checkout
Overview
Alvita Sterile Dressing Specification 35 is a traditional first aid and wound care dressing manufactured to the British Standard Specification 35 — a well-established format that combines a central absorbent cotton wool and gauze wound pad with open-weave bandage tails attached to each side of the pad, all supplied as a single sterile unit. The specification defines the size, construction, and material composition of the dressing to ensure consistent quality across manufacturers, making Spec 35 a reliably standardised product regardless of brand. This integrated format provides both the primary wound contact layer and the retention bandage in a single opening, removing the need to apply a separate dressing and a separate retention bandage as two distinct products.
Specification 35 dressings are a longstanding fixture of workplace first aid kits — they remain one of the dressing types specified in HSE guidance on standard first aid kit contents for British workplaces — as well as being used in home first aid and clinical first aid settings. The sterile central pad provides a clean, safe wound contact surface for moderate cuts, lacerations, and abrasions, while the bandage tails allow the dressing to be secured without separate tape or clips, simply by wrapping the tails around the limb in opposite directions and tying off. The 12-pack format is an economical bulk supply suitable for keeping a full first aid kit well stocked or maintaining a clinical supply of this versatile dressing format. NOT FOUND — please confirm the exact dressing dimensions (Spec 35 dressings come in different sizes — please confirm which size this product represents from Alvita product documentation).
Browse our complete range of wound dressings and bandaging supplies and our wider first aid kit essentials for complementary products, including island dressings, gauze swabs, and bandages.
How to Use Alvita Sterile Dressing Specification 35
- Wash your hands thoroughly before treating any wound. In a clinical setting, don appropriate gloves.
- Open the sterile packaging immediately before use. Peel open the outer wrapper carefully — the dressing has been sterilised and individually sealed to maintain sterility until use. Handle the bandage tails only; avoid touching the wound-contact surface of the central pad.
- Assess the wound. Specification 35 dressings are appropriate for moderate cuts, lacerations, and abrasions on limbs. Do not use on deep wounds, heavily bleeding wounds, infected wounds, or wounds requiring specialist clinical management — seek professional assessment for these.
- Place the central pad directly over the wound. Position the sterile wound pad centrally and completely over the wound, ensuring the pad fully covers the wound surface with a margin extending onto the surrounding intact skin on all sides.
- Secure the dressing using the bandage tails. Take one bandage tail in each hand and wrap them in opposite directions around the limb — one tail going clockwise and one anticlockwise — until you have used most of the available length. Tie the tails together securely over or adjacent to the wound pad, or bring them to the opposite side of the limb and tie there for a neater finish. The tie should be firm enough to hold the pad securely but not so tight as to restrict circulation.
- Check circulation after application. Confirm the fingers or toes of the bandaged limb are warm with normal capillary refill and no numbness or tingling. If any of these signs are present, loosen the tie immediately.
- Change the dressing as required — at least once daily for ongoing wound management, or immediately if the dressing becomes saturated, visibly soiled, or significantly dislodged.
Tips for using Spec 35 dressings effectively
- Keep both bandage tails under even tension as you wrap to ensure the wound pad is held flat and central over the wound rather than rotating to one side.
- For wounds near joints, wrap the tails in a figure-of-eight pattern around the joint to maintain the pad position during movement.
- Each dressing is sterile and individually wrapped — only open the one you are about to use.
For wound care advice or guidance on dressing technique, speak to a Pearl Chemist Group pharmacist.
N/A
N/A
N/A
Overview
Alvita Sterile Dressing Specification 35 is a traditional first aid and wound care dressing manufactured to the British Standard Specification 35 — a well-established format that combines a central absorbent cotton wool and gauze wound pad with open-weave bandage tails attached to each side of the pad, all supplied as a single sterile unit. The specification defines the size, construction, and material composition of the dressing to ensure consistent quality across manufacturers, making Spec 35 a reliably standardised product regardless of brand. This integrated format provides both the primary wound contact layer and the retention bandage in a single opening, removing the need to apply a separate dressing and a separate retention bandage as two distinct products.
Specification 35 dressings are a longstanding fixture of workplace first aid kits — they remain one of the dressing types specified in HSE guidance on standard first aid kit contents for British workplaces — as well as being used in home first aid and clinical first aid settings. The sterile central pad provides a clean, safe wound contact surface for moderate cuts, lacerations, and abrasions, while the bandage tails allow the dressing to be secured without separate tape or clips, simply by wrapping the tails around the limb in opposite directions and tying off. The 12-pack format is an economical bulk supply suitable for keeping a full first aid kit well stocked or maintaining a clinical supply of this versatile dressing format. NOT FOUND — please confirm the exact dressing dimensions (Spec 35 dressings come in different sizes — please confirm which size this product represents from Alvita product documentation).
Browse our complete range of wound dressings and bandaging supplies and our wider first aid kit essentials for complementary products, including island dressings, gauze swabs, and bandages.
How to Use Alvita Sterile Dressing Specification 35
- Wash your hands thoroughly before treating any wound. In a clinical setting, don appropriate gloves.
- Open the sterile packaging immediately before use. Peel open the outer wrapper carefully — the dressing has been sterilised and individually sealed to maintain sterility until use. Handle the bandage tails only; avoid touching the wound-contact surface of the central pad.
- Assess the wound. Specification 35 dressings are appropriate for moderate cuts, lacerations, and abrasions on limbs. Do not use on deep wounds, heavily bleeding wounds, infected wounds, or wounds requiring specialist clinical management — seek professional assessment for these.
- Place the central pad directly over the wound. Position the sterile wound pad centrally and completely over the wound, ensuring the pad fully covers the wound surface with a margin extending onto the surrounding intact skin on all sides.
- Secure the dressing using the bandage tails. Take one bandage tail in each hand and wrap them in opposite directions around the limb — one tail going clockwise and one anticlockwise — until you have used most of the available length. Tie the tails together securely over or adjacent to the wound pad, or bring them to the opposite side of the limb and tie there for a neater finish. The tie should be firm enough to hold the pad securely but not so tight as to restrict circulation.
- Check circulation after application. Confirm the fingers or toes of the bandaged limb are warm with normal capillary refill and no numbness or tingling. If any of these signs are present, loosen the tie immediately.
- Change the dressing as required — at least once daily for ongoing wound management, or immediately if the dressing becomes saturated, visibly soiled, or significantly dislodged.
Tips for using Spec 35 dressings effectively
- Keep both bandage tails under even tension as you wrap to ensure the wound pad is held flat and central over the wound rather than rotating to one side.
- For wounds near joints, wrap the tails in a figure-of-eight pattern around the joint to maintain the pad position during movement.
- Each dressing is sterile and individually wrapped — only open the one you are about to use.
For wound care advice or guidance on dressing technique, speak to a Pearl Chemist Group pharmacist.
N/A
N/A
N/A
FAQs
What is Specification 35 and why does it matter?
Specification 35 is a British Standard designation that defines the construction, materials, and dimensions of a specific type of wound dressing — a central absorbent pad attached to open-weave bandage tails, supplied sterile. The specification ensures that any product bearing this designation meets defined quality criteria for the wound pad absorbency, bandage tail dimensions, and sterile packaging standard. This standardisation matters in first aid and workplace settings because it means a Spec 35 dressing from any compliant manufacturer will perform consistently to a defined minimum standard, and because it aligns the product with HSE guidance on recommended first aid kit contents for UK workplaces.
Why is the integrated bandage tail useful compared with a separate dressing and bandage?
The integrated design of a Spec 35 dressing allows a complete wound dressing — pad and retention — to be applied from a single sterile pack without requiring a separate retention bandage. In a first aid situation, this speed and simplicity is valuable — one product, one opening, one application. The bandage tails allow the dressing to be secured without tape or clips, using only the tails wrapped in opposite directions around the limb and tied off. For first aid responders working under pressure, this reduces the number of actions and products needed to complete a dressing and minimises the risk of errors in applying multiple products sequentially.
Are Spec 35 dressings a requirement for workplace first aid kits?
HSE guidance on workplace first aid kit contents historically included dressings of this integrated pad-and-bandage format as part of the recommended kit contents for different workplace sizes. Current HSE guidance recommends that employers make risk-based decisions about first aid provision, with specific product lists updated periodically. Specification 35 dressings remain widely included in compliant workplace first aid kits as they meet the intended requirement for a sterile wound dressing with built-in retention. If you are unsure whether your workplace first aid kit meets current requirements, speak to a Pearl Chemist Group pharmacist who can advise on compliance and appropriate kit contents.
What size wounds is a Spec 35 dressing suitable for?
NOT FOUND — please confirm the exact dimensions of this Alvita Spec 35 dressing from the product documentation and update this answer. Specification 35 dressings are produced in different sizes for different wound and limb dimensions. The wound pad should adequately cover the full wound area with a margin beyond the wound edges, and the bandage tails should be long enough to wrap around the relevant limb and tie securely. For wounds significantly larger than the wound pad, a larger dressing or a separate dressing assembly will be needed. Our pharmacists can advise on appropriate dressing selection for your specific wound size and limb area.
How many dressings should I stock in a workplace first aid kit?
The number depends on your workplace size, the number of employees, and the assessed injury risk level in the workplace environment. HSE guidance provides indicative kit contents for different workplace sizes as a starting point. The 12-pack format provides a substantial stock for an initial supply or periodic replenishment. For workplaces where soft tissue injuries to limbs are a regular risk — construction, manual handling, sports facilities — maintaining a larger standing stock of sterile dressings is sensible first aid planning. Pearl Chemist Group pharmacists can advise on appropriate first aid kit contents and stocking levels for your specific workplace. Browse our full range of first aid kit supplies online for a comprehensive selection.